|
|
Le
Message
|
|
|
Auteur : René (83.197.237.xxx) |
Sujet
: chez norvil |
Date
: 13/03/2006 17:16:17 |
920cc Kit Details
Remember To Add VAT (17.5%) For All EEC Orders And Post & Packing If You Would Like Your Order Mailed To You
920cc Conversions Should Only Be Performed on 850cc Iron Barrels. The Barrels Will Need To Be Painted Afterwards, This Is Due to The Liner Being Slightly Visible Between The Fins
Cylinder barrel - this is fitted with spun-cast liners which are heat shrunk into position and lipped to prevent movement
Pistons - these are Hepolite High Performance type, with cutaways to suit 4S cam or similar, the standard compression is 9:1
Connecting Rods - the small ends are bored out, the rods polished to remove any nicks or scratches and then they are crack tested for safety We will require your 850cc cylinder block and conrods for this.
Order number 069209 - £394.00
Alternatively, you can order the 920cc Piston/Liner Kit that gives you 2 Pistons and 2 Liners.
Order number 069208 - £252.00
Normally, 920 cylinders do not require cutouts for connecting rod clearance - BUT, it is wise to check.
|
|
97 Visualisations
|
|
|
La discussion
|
 commando 920, de patrick [13/03/2006 16:32:29]
Re : commando 920, de Bertrand [13/03/2006 16:35:14]
Re : commando 920, de patrick [13/03/2006 16:37:31]
Re : commando 920, de Bertrand [13/03/2006 16:45:54]
Re : commando 920, de Bertrand [13/03/2006 16:46:47]
chez norvil, de René [13/03/2006 17:16:17] <
300 euros, depeches toi rené, de patrick [13/03/2006 18:15:01]
Re : 300 euros, depeches toi rené, de René [13/03/2006 21:18:29]
Re : commando 920, de philippe [13/03/2006 21:26:16]
Re : commando 920, de patrick [14/03/2006 05:50:02]
|
|
